LOCATION:HOME > PRODUCT CENTER > Switches > L2 Managed Switches > SGX2554

SGX2554

SGX2554 is a L2 managed 10-Gigabit switch, providing 48 10/100/1000Mbps ports and 6 1000/10000Mbps SFP+ optical fiber interfaces, which can be used to connect upstream devices with higher bandwidth. Using store-and-forward technology, combined with dynamic memory allocation, ensure that bandwidth is effectively allocated to each port. With flow control, it can effectively avoid data packet loss. The backup and redundancy capabilities of the line can be realized through load balancing technology. The product has rich business features and is widely used in the access of enterprise networks and campus networks to build high-performance, easy-to-manage, easy-scalable, and low-cost Gigabit-to-desktop solutions for users. Built-in high-reliability and wide-voltage input design power supply, even if the grid voltage is unstable, it can ensure that the equipment can work normally.
MORE+
Share:
■  Non-blocking High-speed Forwarding
Support L2 level wire-speed port switching, which enables all ports to forward packets without blocking. 

■   Comprehensive Security Control Policies
Support link aggregation to enhance the network bandwidth and defend the network security with link backup.
Support multiple spanning tree protocols: STP, RSTP,provide rapid convergence and improved fault-tolerant capacity. The network sable operation and load balance are well guaranteed, also improved the reasonable use of network channels and redundant link.
Support the binding of user access interface, IP addresses and MAC addresses, to defend against inner network ARP attacks and Dos attacks.
Support the Back-pressure traffic control under Half-Duplex mode and IEEE 802.3x traffic control under Full-Duplex mode. The heavy traffic data peak can be switched stably without the concern of network paralysis caused by overload.

■   Convenient and Quick Management and Maintenance
Adopt simple visual Web-based interface, which helps users to handle various functions easily and conveniently. 
Support Simple Network Management Protocol (SNMP) that the devices are convenient to configure and manage. Small and medium-sized enterprise customers can centralized manage the switch easily.
Support CLI command line management, suitable for professional network administrators.
Support Port Mirror Function, can monitor the ingress, egress or bi-direction packets.
Support resetting to factory defaults, make the maintenance more easily.

■    Innovative Energy Saving Design, the leader of low-carbon communication
Supports IEEE 802.3az(Energy Efficient Ethernet), port energy detection, CPU variable-frequency and device hibernate technology, greatly reducing energy consumption and noise without compromising performance and stability.

Product Information
Product Model SGX2554
Hardware specifications
Fixed Ports 48*10/100/1000 Base-T ports
6* 1G/10 GE Base-X SFP+ ports
Consloe 1
Reset 1
Port Switching capacity 216Gbps 
Forwarding Rate 161Mpps
Temperature Operating temperature: (-10 - 50)°C
Storage temperature: (-40 - 70)°C
Humidity Operating humidity: (10% - 90%) RH, non-condensing
Storage humidity: (5% - 90%) % RH, non-condensing
Dimensions(L*W*H) 440(L)*285(W)*44.5(H)mm
Power AC:100~240VAC,50~60Hz,12V/6A
Power consumption 72W
Weight <6Kg
Lightning protection 6KV
MAC address table 32K
LED Indicator Power,System ,Link/Act

Software specifications
Forwarding mode Store-and-forward
MAC Address Static configuration and dynamic MAC learning
MAC browsing and removal
Configurable aging time of the MAC address
Limited number of learnable MAC addresses (*)
Black-hole MAC list (*)
Jumbo frame 12K
Port Characteristics Support outbound and inbound port speed limit
Support outbound and inbound port speed limit
IEEE 802.3x traffic control for Full-Duplex mode
Back-pressure traffic control for Half-Duplex mode
Storm suppression for unknown Unicast, multicast, multicast, broadcast type
Storm suppression based on bandwidth regulation and storm filtering
DDM (received optical power, transmitted optical power, operating temperature, supply voltage and laser bias current) (*)
Port Aggregation Support port aggregation
Support static aggregation
Support source MAC payload
Support destination MAC payload
Support based on source and destination MAC load
Support load based on IP address
Support load based on TCP/UDP port number (*)
VLAN 4K support VLAN
Port-based VLAN
MAC-based VLAN (*)
Protocol-based VLAN (*)
VLAN based on IP subnet (*)
Voice VLAN (*)
PVLAN (*)
GVRP (*)
802.1ad(QinQ)fixed
Layer 2 Ring Network Protocol 802.1d STP, 802.1w RSTP, 802.1s MSTP
Port Fast, Uplink Fast, Backbone Fast
BPDU Guard, BPDU Filter, Root Guard
Standard ERPS
ERPS single ring single instance
ERPS single-ring multiple instances
Support multi-ring ERPS (*)
EAPS (*)
IPv6 IPv6-Ping,IPv6-Tracert,IPv6-Telnet,IPv6-TFTP,IPv6-ICMP
Multicast IGMP V1/2(Snooping)
IGMP V3(Snooping) (*)
DHCP DHCP Client (*)
DHCP Snooping
Mirror Support port mirroring for incoming port packets
Support port mirroring for outgoing port packets
Support port mirroring for inbound and outbound packets
Support mirroring of one pair of multiple destination ports (*)
Support mirroring of many to multiple destination ports (*)
Support multi-to-one destination port mirroring
Support CPU mirroring
ACL/QoS Access list based on source mac
Mac access list based on ethertype
Ip access list-standard ACL
Whether to support the access list of the time period
ACL verification of source IP address
ACL verification of the destination IP address
ACL verification of source port
ACL verification of the destination port
ACL verification of the specified protocol (*)
Support 802.1P (CoS) priority marking
Support flow-based qos marking (*)
Support Qos based on VLAN (*)
Support Qos based on COS
Support any-based Qos (*)
Support Qos based on mac/ip access list (*)
Support modifying COS value/DSCP value (*)
Support redirection (*)
Support drop (*)
Support speed limit (*)
Support adding outer vlan (*)
Support 8 queues
Support for per-queue rate limiting (*)
Support SP, WRR, SP+WRR and other scheduling modes
Support congestion avoidance mechanisms such as Tail-Drop and WRED (*)
Safety Features Support port-based 802.1X local authentication
Support 802.1X remote authentication
Support Guest VLAN (*)
Support port-based MAC address filtering
Authentication based on MAC address
Support Portal authentication (*)
Support Radius authentication
TACACS+ (*)
Loop detection (private)
Anti-Secondary Loop (*)
Support port isolation
Single port isolation
Multiple groups of port isolation
Port security
ARP Aing/Bnding
Support dynamic ARP detection (*)
Support anti-DDoS attack, TCP SYN Flood attack, UDP Flood attack, etc. (*)
Support storm suppression for multicast/unknown unicast/broadcast
Energy saving IEEE 802.3az
Management and Maintenance CLI: Console, Telnet, SSHv1/2
Web-GUI: HTTP, HTTPS
SNMPv1/v2
SNMP v3 (*)
SNMP Alarm/Inform/Traps
RMON
Support RMON(Remote Monitoring)Alarms, Events, History (*)
Support LLDP
NTP v1/2
IEEE 1588v2 (*)
System log (operation log, alarm log)
Syslog support (*)
Support user hierarchical management and password protection
Support FTP/TFTP loading and upgrading
Support restore to factory mode
Debugging
Support cloud box unified network management (TG unique)
Support cloud management
Notes (*) means this functions under the development plan
 
Product Information Detailed information
SGX2554 48*10/100/1000 Base-T ports, 6* 1G/10 GE Base-X SFP+ ports
Transceivers
SFP+-10GE-SX-MM850 SFP+ Module(850nm,300m,LC)
SFP+-10GE-LX-SM1310 SFP+ Module(1310nm,10km,LC)
SFP-GE-SX-MM850 1000BASE-SX SFP Transceiver, Multi-Mode (850nm, 550m, LC)
SFP-GE-LX-SM1310 1000BASE-LX SFP Transceiver, Single Mode (1310nm, 20km, LC)

TOP