SXH3726S_2.5G Switch， L2+/L3 Switch， POE Switch，Industrial Switch，Management Switch， WIFI 6 Router，Networking Supplier，IOT Security Switch，Manufacturer China

LOCATION：HOME > PRODUCT CENTER > Switches > L3 Managed Switches > SXH3726S

SXH3726S

The SXH3726S switch is a new generation of high-performance 10G core switches launched by TG for high-performance cloud computing, data centers and high-end campus networks.
SXH3726S has advanced hardware design with hot-swapped power redundancy. It is for IP MAN convergence layer and large-scale enterprise zone or the core of the network layer
SXH3726S supports up to 880Gbps switching capacity, and the 1U whole machine supports a maximum of 24 10G ports + 2 100G ports, which can meet the port density and performance requirements of different scale networks for equipment.

MORE+

■  Excellent Processing capability
Based on VCore-III MIPS-based CPU.
Up to 880Gbps switching capacity and 654Mpps liner filtering and forwarding speed for SXH3726S.
Guarantee for non-blocking flow of data while forwarding in the backbone network.

■  Comprehensive Security Control Policies
Support address authentication based on IP +MAC addresses, 802.1x authentication, radius and TACACS+ based on user interfaces, and also support IP ACL, MAC ACL, VLAN ACL and L3 / L4 based ACL, can efficiently defend against ARP attacks and viruses. Besides,the switch can provide comprehensive storm control function by suppress broadcast, multicast, DLF flooding and ICMP flooding. The comprehensive secure controls can efficiently guarantee the real-time effectiveness of all security policies.

■  Enhanced Reliability Protection Mechanism
Support CPU packed classification and rate restriction by CPU protection policies, which can prevent against illegal Packet attacks to CPU and reduce the resource consumption.
Support Rapid Spanning Tree Protocol (RSTP), provide rapid convergence and improved fault-tolerant capacity. The network sable operation and load balance are well guaranteed, also improved the reasonable use network channels and redundant link.
Carrier-class switching power supply, supporting functions to prevent against lightning, overpressure and surging. The device can work normally in bad natural weather and instable voltage environment, suitable for 110~240V voltage.

■  Convenient and Quick Management and Maintenance
Adopt simple visual Web-based interface (http / https), which helps users to handle various functions easily and conveniently.
Support Simple Network Management Protocol (SNMP) that the devices are convenient to configure and manage. Small and medium-sized enterprise customers can centralized manage the switch easily.
Support CLI command line management and telnet, suitable for professional network administrators.
Support SSH2.0 and other encryption, which makes management much more secured.
Support PDP/LLDP protocol for simpler management.
Support NTP protocol for time synchronization automatically.
Support resetting to factory defaults, which makes the maintenance more easily.

Product Information
Product Model	SXH3726S
Hardware specifications
Fixed Ports	24* 1G/10 GE Base-X SFP+ ports 2*40G/100G QSFP ports
Consloe	1
MGMT	1
USB	1
Modular power slots	2
Port Switching capacity	880Gbps
Forwarding Rate	655Mpps
Flash/RAM	128MB/1G
Temperature	Operating temperature: (-10 - 50)°C Storage temperature: (-40 - 70)°C
Humidity	Operating humidity: (10% - 90%) RH, non-condensing Storage humidity: (5% - 90%) % RH, non-condensing
Dimensions(LWH)	440(L)320(W)44(H)mm
Power	AC:100～240VAC,50～60Hz
Power consumption	96W
Weight	<10Kg
Lightning protection	6KV
MAC address table	128K
LED Indicator	Power,System ,Link/Act

Software specifications
Forwarding mode	Store-and-forward
Standards	IEEE 802.3i:10BASE-T Ethernet; IEEE 802.3u:100BASE-X Fast Ethernet; IEEE 802.3ab:1000BASE-T Gigabit Ethernet; IEEE 802.3z:1000BASE-X Gigabit Ethernet (Optical fiber) IEEE 802.3ae: 10 Gigabit Ethernet over fiber
MAC Address	128K MAC addresses
	Support manual addition and deletion of MAC address table
	Support manual configuration of MAC address aging time
	Support port to disable MAC address learning function
	Support port MAC address number control
	Support port MAC address filtering function
Traffic Control	Back-pressure traffic control for Half-Duplex mode
	IEEE 802.3x traffic control for Full-Duplex mode
VLAN	4K VLANs
	Port-based VLANs
	802.1Q Vlan
	MAC and Protocol VLANs
Spanning Tree	STP(Spanning Tree Protocol)
	RSTP( Rapid Spanning Tree Protocol)
	MSTP(Multiple Spanning Tree Protocol)
Link Aggregation	10GE/40GE port aggregation
	Static aggregation
	Dynamic aggregation
Port Mirroring	Many-to-one port mirroring
Ring Protection	Supports Industrial-level Ethernet Ring Protection Switching ERPS(ITU-T G.8032)
IP Routing	Static Routing
	RIP,OSPF,BGP
	VRRP
Multicast	IGMPv1/v2/v3 Snooping
	IGMP Snooping fast-leave
	IGMP Filter
	IGMP Proxy
	MVR, Multicast replication between VLANs
Storm Suppression	Suppress broadcast, multicast and unicast
DHCP	DHCP Server
	DHCP Snooping
	DHCP Relay
QoS/ACL	Support standard and extended ACLs Time Range ACL ACL provides source/destination MAC addresses VLAN Source/Destination IP (IPv4/IPv6) Flow classification and definition of IP packet header information such as address, TCP/UDP port number, protocol type, etc
	8 queues on each port Traffic plan:SP\WRR\SP+WRR Rate limiting (Ingress, Egress) with granularity at 1Mbps IEEE 802.1p CoS Destination MAC / Source MAC Destination IP / Source IP
Security	Binding of the IP address, MAC address, port;
	Port security
	Port isolation
	IP ACL, MAC ACL on hardware
	IP Source Guard
	One-key binding based on dynamic ARP table
	Support manual binding of parameters such as IP address, VLAN ID, MAC address and port
	ARP Detection
	CPU Guard / CPU protection
	RADIUS authentication
Maintenance	Uploading or downloading of the configuration data
	Uploading of upgrade patch
	Support system logs
	Supports Ping and Traceroute
	WEB-based reset to factory defaults
	DDM on optical port
	Port loopback detection
Management	CLI: Console, Telnet, SSHv1/2 Web-GUI: HTTP, HTTPS SNMPv1/v2 SNMP v3 SNMP Alarm/Inform/Traps RMON Support LLDP NTP v3/v4 System log (operation log, alarm log) Syslog support Support user hierarchical management and password protection Support restore to factory mode

Product Information	Detailed information
SXH3726S	24* 1G/10G Base-X SFP+ ports,2*100G QSFP28 ports;

Switches

PoE Switches

Industry Switches

Business Router

Access Points

Management Platforms

Other

SXH3726S