LOCATION:HOME > PRODUCT CENTER > Switches > L3 Managed Switches > SXH3728S-V2

SXH3728S-V2

The SXH3728S-V2 switch is a high-performance 10 Gigabit access product from the company. Support 40G/100G uplink core routing layer 3 switch products. It can meet the high-density and high bandwidth network application needs of next-generation enterprise networks, data centers, and metropolitan area networks, as well as the Ethernet aggregation layer or core layer application needs of telecommunications network operators or parks. It can also serve as the access layer for data centers and the core layer for small and medium-sized enterprises, providing rich server access solutions for data centers.
MORE+
Share:
Various Port Types and Flexible Port Expansion
Switch comes with fixed 4*100G ports The series also provides multiple gigabit ports.

Enhanced Reliability Protection Mechanism
Support CPU packed classification and rate restriction by CPU protection policies, which can prevent against illegal Packet attacks to CPU and reduce the resource consumption.
Support Rapid Spanning Tree Protocol (RSTP), provide rapid convergence and improved fault-tolerant capacity. The network sable operation and load balance are well guaranteed, also improved the reasonable use network channels and redundant link;
Carrier-class switching power supply, supporting functions to prevent against lightning, overpressure and surging. The device can work normally in bad natural weather and instable voltage environment, suitable for 110~240V voltage.

Comprehensive Security Control Policies
Support address authentication based on IP +MAC addresses, 802.1x authentication based on user interfaces, and also support IP ACL, MAC ACL, VLAN ACL and L3 / L4 based ACL, can efficiently defend against ARP attacks and viruses. Besides,the switch can provide comprehensive storm control function by suppress broadcast, multicast, DLF flooding and ICMP flooding. The comprehensive secure controls can efficiently guarantee the real-time effectiveness of all security policies.
It supports strict ARP learning, which prevents ARP spoofing attacks that exhaust ARP entries.It also provides an IP source check to prevent DoS attacks caused by MAC address spoofing, IP address spoofing, and MAC/IP spoofing.
It supports DHCP snooping, which discards invalid packets that do not match any binding entries,such as ARP spoofing packets and IP spoofing packets. This prevents hackers from using ARP packets to initiate attacks on campus networks. The interface connected to a DHCP server can be configured as a trusted interface to protect the system against bogus DHCP server attacks.

Convenient and Quick Management and Maintenance
Adopt simple visual Web-based interface (http / https), which helps users to handle various functions easily and conveniently.  
Support Simple Network Management Protocol (SNMP) that the devices are convenient to configure and manage. Small and medium-sized enterprise customers can centralized manage the switch easily. 
Support CLI command line management and telnet, suitable for professional network administrators.
Support SSH2.0 and other encryption, which makes management much more secured.
Product Information
Product Model SXH3728S-V2 SXH3752S-V2
Hardware specifications
Fixed Ports 24*1GE/10GE SFP+ ports
4*40GE/100G QSFP28 ports
48*1GE/10GE SFP+ ports
4*40GE/100GE QSFP28 ports
Consloe 1
MGMT 1
USB 1
Reset 1
Modular power slots 2
Port Switching capacity 1280Gbps   1760Gbps  
Forwarding Rate 952.3Mpps 1309.5Mpps
Flash/RAM 64M/512M
Temperature Operating temperature: (0 - 50)°C
Storage temperature: (-40 - 70)°C
Humidity Operating humidity: (10% - 90%) RH, non-condensing
Storage humidity: (5% - 90%) % RH, non-condensing
Dimensions(L*W*H) 440(L)*410(W)*44(H)mm
Power AC:100~240VAC,50~60Hz
500W
Weight <10Kg
Lightning protection 6KV
MAC address table 112K
LED Indicator Power,System ,Link/Act
 

Software specifications
Forwarding mode Store-and-forward
MAC Address Static configuration and dynamic MAC learning
MAC browsing and removal
Configurable aging time of the MAC address
Limited number of learnable MAC addresses 
Jumbo frame 12K
Port Characteristics Support outbound and inbound port speed limit
Support outbound and inbound port speed limit
IEEE 802.3x traffic control for Full-Duplex mode
Back-pressure traffic control for Half-Duplex mode
Storm suppression for unknown Unicast, multicast, multicast, broadcast type
Storm suppression based on bandwidth regulation and storm filtering
Port Aggregation Support port aggregation
Support static aggregation
Support dynamic aggregation(LACP)
Support source MAC payload
Support destination MAC payload
Support based on source and destination MAC load
Support load based on IP address
Support load based on TCP/UDP port number 
Support cross-device link aggregation 
VLAN 4K support VLAN
Port-based VLAN
MAC-based VLAN 
Protocol-based VLAN 
VLAN based on IP subnet 
Voice VLAN 
802.1ad(QinQ)fixed
Layer 2 Ring Network Protocol 802.1d STP, 802.1w RSTP, 802.1s MSTP
Port Fast, Uplink Fast, Backbone Fast
BPDU Guard, BPDU Filter, Root Guard
Standard ERPS
ERPS single ring single instance
ERPS single-ring multiple instances
Support multi-ring ERPS 
IP Routing(IPv4) Inter vlan Multi IP
Default route
Static routing
RIP v1/v2
OSPF
BGP
IPv6 IPv6-Ping,IPv6-Tracert,IPv6-Telnet,IPv6-TFTP,IPv6-ICMP
Multicast IGMP V1/2(Snooping)
IGMP Proxy
DHCP DHCP Server
DHCP Client 
DHCP Relay
DHCP Snooping
Mirror Support port mirroring for incoming port packets
Support port mirroring for outgoing port packets
Support port mirroring for inbound and outbound packets
Support mirroring of one pair of multiple destination ports 
Support mirroring of many to multiple destination ports 
Support multi-to-one destination port mirroring
ACL/QoS Access list based on source mac
Mac access list based on ethertype
Ip access list-standard ACL
Whether to support the access list of the time period
ACL verification of source IP address
ACL verification of the destination IP address
ACL verification of source port
ACL verification of the destination port
ACL verification of the specified protocol 
Support 802.1P (CoS) priority marking
Support DSCP priority re-marking
Support 802.1P/DSCP priority mapping
Support Qos based on VLAN 
Support Qos based on COS/DSCP
Support 8 queues
Support SP, WRR, SP+WRR and other scheduling modes
Safety Features Support port-based 802.1X local authentication
Support 802.1X remote authentication
Support port-based MAC address filtering
Authentication based on MAC address
Support Portal authentication 
Support Radius authentication
Loop detection (private)
Anti-Secondary Loop 
Support port isolation
Single port isolation
Multiple groups of port isolation
Port security
ARP Aing/Bnding/Proxy
Support storm suppression for multicast/unknown unicast/broadcast
Energy saving IEEE 802.3az 
Management and Maintenance CLI: Console, Telnet, SSHv1/2
Web-GUI: HTTP, HTTPS
SNMPv1/v2
SNMP v3 
SNMP Alarm/Inform/Traps
Support LLDP
NTP v1/2
System log (operation log, alarm log)
Syslog support 
Support user hierarchical management and password protection
Support restore to factory mode
 
Product Information Detailed information
SXH3728S-V2 24*1GE/10GE SFP+ ports,4*40GE/100GE QSFP28 ports,2*Modular power slots(with 1 power supply by default)
SXH3752S-V2 48*1GE/10GE SFP+ ports,4*40GE/100GE QSFP28 ports,2*Modular power slots(with 1 power supply by default)
Power supply
PWR-AC-500 500W AC Power Module
 
TOP