| Product Information | |
| Product Model | SH5732S |
| Hardware specifications | |
| Ports | 32*40/100G QSFP28 ports |
| Exchange Capacity | 6.4Tbps |
| Packet Forwarding Rate | 2800Mpps |
| VLAN | 4K |
| MAC Address | 128K |
| Packet Buffer | 192Mbit |
| DRAM & Flash | DRAM:4GB; Flash:8GB |
| Power slots | 2 (Support Dual-FRU AC or DC redundant power supply) |
| Power | AC:100~240V 47/63Hz; DC: 36V ~75V |
| Power Consumption | ≤500W |
| Weight | 10Kg |
| Dimensions (W * D * H) | 440mm*410mm*44mm |
| Environment | Working Temperature:-10℃~55℃ Storge Temperature:-40℃~70℃ Relative Humidity: 5%~95%, non-condensing |
| Software specifications | |
| VLAN | Support 4K VLAN Support VLAN based on port, MAC and protocol Support dual Tag VLAN, Access/Trunk/Hybrid |
| Ethernet | Ethernet interface operating modes Ethernet interface operating rates Jumbo Frame Port enable/disable Port based storm-control Unknow-unicast/unknow-multicast/broadcast storm-control Port-isolate |
| Stackable | Support Sacking of 8 units through a single ip address. Support Unified management. Support Redundancy mechanism. Support High speed interconnect. |
| VXLAN | Support VXLAN uses MAC in UDP encapsulation Support VMS can move between different Layer 2 network domains Support VNI is used to isolate different virtual networks to ensure that network traffic of different tenants is isolated Support Enable virtual machine packets to communicate across different subnets and data centers Support VXLAN-L2 gateway tunneling function Support VXLAN-L3 centralized gateway tunneling function Support VXLAN-L3 distributed gateway tunneling function |
| MPLS | Support Mpls-static LSP Support MPLS-LDP Dynamic LSP Support VPWS CCC local switching function SupportV PWS CCC remote connection function Support VPWS Static PW Support VPWS LDP PW Support VPLS Static PW Support VPLS LDP PW Support IPV4 L3 VPN:VRF Static Routing (IPv4) Support IPV4 L3 VPN:VRF RIP Protocol configuration Support IPV4 L3 VPN:VRF BGP Protocol configuration Support IPV4 L3 VPN:VRF OSPF Protocol configuration Support IPV4 L3 VPN:VRF ISIS Protocol configuration Support IPV4 L3 VPN:GRE(IPv4) tunneling function Support IPV6 L3 VPN:VRF RIPng Protocol configuration Support IPV6 L3 VPN:VRF BGP Protocol configuration Support IPV6 L3 VPN:VRF OSPFv3 Protocol configuration Support IPV6 L3 VPN:VRF ISIS Protocol configuration Support IPV6 L3 VPN:GRE(IPv6) tunneling function |
| MAC | Support static MAC address setting Support black hole MAC address filtering Support port MAC address limit Automatic learning and aging of MAC addresses |
| ARP | Static and dynamic ARP entries Aging of ARP entries ARP-Proxy |
| Port Control | Support two-way bandwidth control Support port storm suppression Support 9K Jumbo ultra-long frame forwarding |
| Port Aggregation | Support static link aggregation Support dynamic LACP Each aggregation group supports a maximum of 8 ports LAG load balance(SIP/DIP/SMAC/DMAC) |
| Mirroring | Supports multi-port mirroring analysis Service flow-based image analysis |
| ACL | Support standard and extended ACL Support ACL policy based on time period Provide MAC, IP, L4 port and port level security control functions |
| QoS | Traffic classification based on COS/DSCP (simple classification) Traffic classification based on ACL (complex classification) Traffic classification based on inner header of the tunnel packets Queue scheduling Remark the priority fields (COS/DSCP) of the packet based on ACL Traffic policing based on direction(in/out) of Port Traffic policing based on direction(in/out) of VLAN Traffic policing based on direction(in/out) of flow Traffic policing based on direction(in/out) of aggregated flow SP(Strict Priority)scheduling WRR(Weighted Round Robin)scheduling SP + WRR mixed scheduling |
| Safety | Support Radius & TACACS+ authentication Support MAC address learning limit, support black hole MAC function Support port isolation Support broadcast message rate suppression Support IP Source Guard Support ARP flood suppression and ARP spoofing protection |
| Layer 3 | Support ARP learning and aging Support IPv4/IPv6 static route Support dynamic route RIP/OSPF/BGP Support IPv4/IPv6 dual-stack platform |
| IPV4 | Support IPv4 route entry 288K Support Layer 3 multicast entry 2K Supports the Ping, Traceroute, VRRP, OSPF, RIP, PIM, BGP, ISIS, and BFD protocols |
| IPV6 | Support IPv6 route entry 144K Support ICMPv6 Support the neighbor discover Supports RIPing, BGP+, and OSPFv3 |
| Terminal Services | Configurations through CLI Console Terminal service |
| Maintenance | CPU usage display and alarm Memory usage display and alarm Device temperature、PSU、FAN、status display and alarm User operation logs Detailed Diagnostic-information collection Manual /Schedule reboot Reboot Information logging Ping Traceroute Port/Flow/Remote mirror To CPU/From CPU packets statistics Time configuration Timezone |
| System Security | SSHv1/v2 RADIUS TACACS+ Authentication Accounting MAC/IP ACL Port/VLAN/L4-Port ACL IP Source Guard CLI/WEB/SNMP/Telnet/SSH filtering |
| Spanning-Tree | Rapid Spanning-Tree Protocol Multi-instance Spanning-Tree Protocol |
| Network Management |
DHCP Server DHCP Relay DHCP Snooping DHCP Option60 DHCP Option82 DHCP Option66 DHCP Option120 SNTP Simple Network Time Protocol) LLDP |
| Configuration Management | Inband management interface and configuration Outband management interface and configuration Network management based on SNMPv1/v2c/v3 Public and private MIB Public and private Trap Configuration and management based on WEB Restore factory default configuration |
| File system | Upload and download files through FTP or TFTP Upload and download files through Xmodem |
| System Management | Support FTP, TFTP file upload and download Support SNTP Support LLDP neighbor device discovery protocol Support RFC1213 SNMP network management Support Ping and Traceroute Supports configuration management based on WEB pages |
| Upgrade | Upgrade with the local image file Upgrade with the remote TFTP server Online upgrade Uboot |
| Product Information | Detailed information |
| SH5732S | 32*100G QSFP28 ports;2 power slots (default includes 1 power supply); |