SG2110P_2.5G Switch， L2+/L3 Switch， POE Switch，Industrial Switch，Management Switch， WIFI 6 Router，Networking Supplier，IOT Security Switch，Manufacturer China

LOCATION：HOME > PRODUCT CENTER > PoE Switches > Easy Smart Switches > SG2110P

SG2110P

The SG21xxP series is a simple managed PoE switch independently developed by TG. Featured with 4/8/16/24 IEEE 802.3at/af-compliant RJ45 ports, it supplies a maximum PoE power output of 75W/120W/250W/400W. The switch can supply power when transmitting data with APs, IP cameras, and IP phones through CAT5 cables . Featured smart management functions, POE intelligent detection, 802.1Q VLAN, link aggregation, QoS and MAC address binding, it minimizes the difficulty and cost in networking deployment.

MORE+

■  Provide -48V DC power for powered devices (PDs), such as IP Phones, WLAN APs, and Bluetooth APs.
■  Compatible with both IEEE802.3at(30W) and IEEE802.3af(15.4W), can supply power to PDs under these two standards;
■  Transmitting electronic power together with data through a single network cable, free of power lines;
■  Automatically detect and supply power to IEEE802.3at and IEEE 802.3af compliant powered devices(PDs);
■  Advanced SAFC function, only supply power to IEEE 802.3af/at compliant PDs, no worry about damaging other private standard PoE devices or devices without PoE function;
■  Support port power supply prioritization, guarantee the continuous power supply of key nodes;
■  Up to 100m network cable transmitting distance, support flexible network expansion without power line deployment concerns. Users can freely fix their wireless APs, IP cameras or other end devices on the wall or ceiling;
■  Built-in PSE power supply module, plug-and play design, easy to install;
■  High security performance defending against power surge;
■  Support short-circuit protection function, the switch will automatically start short-circuit function and cut off the power supply when there is high-current or other power failures, which can efficiently defend against device damage or network failures caused by line fault or wrong installation;
■  Energy-saving green design, support auto-switch to standby mode and auto-detect cable length. It will stay in standby mode and save the power when the port is disconnected , or provide a lower transmission power when the network cable is less than 10m;
■  Support CLI Management ,SNMP Management, simple WEB management, easy to configure the functions of switches.
■  PoE schedule to save power.
■  Intelligent restart, schedule reset per PoE Port to maintain your IP Cameras,APs and other devices.

Product Information
Product Model	SG2106P	SG2110P	SG2120P	SG2128P
Hardware specifications
Fixed Ports	410/100/1000 Base-T ports(POE/POE+) 110/100/1000 Base-T ports 1* 1000 Base-X SFP ports	810/100/1000 Base-T ports(POE/POE+) 2 1000 Base-X SFP ports	1610/100/1000 Base-T ports(POE/POE+) 210/100/1000 Base-T ports 2* 1000 Base-X SFP ports	2410/100/1000 Base-T ports(POE/POE+) 210/100/1000 Base-T ports 2* 1000 Base-X SFP ports
Max Output Power(single port)	30W
Total Power Consumption	75W	120W	250W	400W
PoE Pin-out	1/2(+),3/6(-)
Switching capacity	12Gbps	20Gbps	40Gbps	56Gbps
Forwarding Rate	8.9Mpps	14.8Mpps	29.8Mpps	41.7Mpps
Temperature	Operating temperature: (0 - 45)°C Storage temperature: (-40 - 70)°C
Humidity	Operating humidity: (10% - 90%) RH, non-condensing Storage humidity: (5% - 90%) % RH, non-condensing
Dimensions(LWH)	200 (L)* 120 (W)*44 (H) mm	200 (L)* 120 (W)*44 (H) mm	270 (L) × 180 (W) × 44 (H) mm	440 (L)* 210 (W)*44 (H)mm
Power	AC:100～240VAC,50～60Hz
Power consumption	150W output the whole device
Weight	<1.5Kg	<1.5 Kg	<2.5Kg	<3.5Kg
Lightning protection	6KV
MAC address table	8K
LED Indicator	Power, System , Link/Act, POE

Software specifications
Forwarding Mode	Store and Forward
MAC number	8K
Port Buffer	4M
System Information	System model, MAC address, software and hardware versions, system time, and running time display. Synchronize system time Port status information display
Monitoring information	MAC address aging time setting Port statistics: number of bytes sent and received, CRC, etc. Adding a static MAC address
VLAN	Vlan number 32 Access/ Trunk/ Hybrid Support port-based VLAN division Supports changing management VLAN
Port Management	Support port disable and enable Support Speed, Duplex, and flow-control settings Support export control Port MAC address learning enable/disable Support disabling and enabling of port POE.
Port mirroring	Supports mirroring of single port and aggregation group Supports sending, receiving, and mirroring of sending and receiving messages
Link Aggregation	Supports manual mode link aggregation and LACP mode link aggregation LACP status display LACP priority, port priority, transmission mode, etc.
Multicast	Support static addition Support IGMP-Snooping
QOS	Based on 802.1p (COS) classification; based on DSCP classification Support WFQ and WRR scheduling policies
Port rate limit	Support limiting the speed of port export
Storm Suppression	Supports storm suppression of unicast, multicast, and broadcast packets
Port isolation	Support port isolation settings
SNMP	Support SNMP v1&v2c Support SNMP Traps
Spanning Tree	Support RSTP
LLDP	Support LLDP link layer discovery protocol
Management IP	Support static IPv4 settings Support DHCP dynamic acquisition Support DHCP dynamic IPv6 local address and IPv6 global unicast address acquisition
SNTP Configuration	Support server mode Support client mode
System log	User login, operation, and status event logs
Network Tools	Support PING communication Support domain name resolution
Account Management	Support adding/deleting users Support changing user password Supports guest, administrator and other access modes
System Management	Support IPv4/IPv6 http access Support login page timeout setting Support system upgrade Support system backup and restore Support reset Support configuration saving Support switching between Chinese and English

Product Information	Detailed information
SG2106P	410/100/1000 Base-T ports(POE/POE+),110/100/1000 Base-T ports,1* 1000 Base-X SFP ports IEEE 802.3af/at,Total Output Power: 75W.
SG2110P	810/100/1000 Base-T ports(POE/POE+),2 1000 Base-X SFP ports,IEEE 802.3af/at,Total Output Power:120W.
SG2120P	1610/100/1000 Base-T ports(POE/POE+),210/100/1000 Base-T ports,2* 1000 Base-X SFP ports, IEEE 802.3af/at,Total Output Power: 250W.
SG2128P	2410/100/1000 Base-T ports(POE/POE+),210/100/1000 Base-T ports,2* 1000 Base-X SFP ports, IEEE 802.3af/at,Total Output Power: 400W.

Switches

PoE Switches

Industry Switches

Business Router

Access Points

Management Platforms

Other

SG2110P