■  Provide -48V DC power for powered devices (PDs), such as IP Phones, WLAN APs, and Bluetooth APs.
■  Compatible with IEEE802.3bt (90W), IEEE802.3at (30W), and IEEE802.3af (15.4W), capable of supplying power to different standard PDs
■  Only supply power to IEEE 802.3af/at/bt compliant PDs, no worry about damaging other private standard PoE devices or devices without PoE function.
■  Support port power supply prioritization, guarantee the continuous power supply of key nodes.
■  Up to 100m network cable transmitting distance, support flexible network expansion without power line deployment concerns. Users can freely fix their wireless APs, IP cameras or other end devices on the wall or ceiling.
■  Support short-circuit protection function, the switch will automatically start short-circuit function and cut off the power supply when there is high-current or other power failures, which can efficiently defend against device damage or network failures caused by line fault or wrong installation.
■  POE intelligent strategy: POE intelligent diagnosis, POE timing restart, Power supply schedule.
■  Support CLI Management ,SNMP Management, simple WEB management, easy to configure the functions of switches.

Product Information
Product Model	SMX3730BP	SMX3730HP
Hardware specifications
Fixed Ports	8*10/100/1000/2500 Base-T ports(POE/POE+/POE++) 16*10/100/1000/2500 Base-T ports(POE/POE+) 6* 1G/10 GE Base-X SFP+ ports
Consloe	1
Reset	1
Max Output Power(single port)	30W
Total Power Consumption	440W	830W
PoE Pin-out	1/2(+),3/6(-)
Box Switching capacity	792Gbps
Port Switching capacity	240Gbps
Forwarding Rate	178.6Mpps
Flash/RAM	64MB/512MB
Temperature	Operating temperature: (0 - 45)°C Storage temperature: (-40 - 70)°C
Humidity	Operating humidity: (10% - 90%) RH, non-condensing Storage humidity: (5% - 90%) % RH, non-condensing
Dimensions(L*W*H)	440mm*285mm*44mm
Power	AC:100~240VAC,50~60Hz
Power consumption	440W output the whole device	830W output the whole device
Weight	<5.5Kg
Lightning protection	6KV
MAC address table	32K
LED Indicator	Power, System , Link/Act, POE

Software specifications
Forwarding mode	Store-and-forward
MAC Address	Static configuration and dynamic MAC learning(16K) MAC browsing and removal Configurable aging time of the MAC address
Jumbo frame	12K
Port Characteristics	Support outbound and inbound port speed limit Support outbound and inbound port speed limit IEEE 802.3x traffic control for Full-Duplex mode Back-pressure traffic control for Half-Duplex mode Storm suppression for unknown Unicast, multicast, multicast, broadcast type Storm suppression based on bandwidth regulation and storm filtering
Port Aggregation	Support port aggregation Support static aggregation Support dynamic aggregation(LACP) Support source MAC payload Support destination MAC payload Support based on source and destination MAC load Support load based on IP address
VLAN	4K support VLAN Port-based VLAN MAC-based VLAN  Protocol-based VLAN  VLAN based on IP subnet  Voice VLAN  802.1ad(QinQ)fixed
Layer 2 Ring Network Protocol	802.1d STP, 802.1w RSTP, 802.1s MSTP Port Fast, Uplink Fast, Backbone Fast BPDU Guard, BPDU Filter, Root Guard Standard ERPS ERPS single ring single instance ERPS single-ring multiple instances
IP Routing(IPv4)	Inter vlan Multi IP Default route Policy routing Static routing
IPv6	IPv6-Ping,IPv6-Tracert,IPv6-Telnet,IPv6-TFTP,IPv6-ICMP
Multicast	IGMP V1/2(Snooping) IGMP Proxy
DHCP	DHCP Server DHCP Client  DHCP Relay DHCP Snooping
Mirror	Support port mirroring for incoming port packets Support port mirroring for outgoing port packets Support port mirroring for inbound and outbound packets Support multi-to-one destination port mirroring Support CPU mirroring
ACL/QoS	Access list based on source mac Mac access list based on ethertype Ip access list-standard ACL Whether to support the access list of the time period ACL verification of source IP address ACL verification of the destination IP address ACL verification of source port ACL verification of the destination port Support 802.1P (CoS) priority marking Support DSCP priority re-marking Support 802.1P/DSCP priority mapping Support Qos based on COS/DSCP Support 8 queues Support SP, WRR, SP+WRR and other scheduling modes Support congestion avoidance mechanisms such as Tail-Drop and WRED (*)
Safety Features	Support port-based 802.1X local authentication Support 802.1X remote authentication Support port-based MAC address filtering Authentication based on MAC address Support Radius authentication Loop detection (private) Support port isolation Single port isolation Multiple groups of port isolation Port security ARP Aing/Bnding/Proxy Support storm suppression for multicast/unknown unicast/broadcast
Energy saving	IEEE 802.3az
Management and Maintenance	CLI: Console, Telnet, SSHv1/2 Web-GUI: HTTP, HTTPS SNMPv1/v2 SNMP Alarm/Inform/Traps Support LLDP NTP v1/2 System log (operation log, alarm log) Support user hierarchical management and password protection Support restore to factory mode
POE	Support 802.11af/at/bt Power Supply Power and data at the same time Power supply pin 1/2(+), 3/6(-) POE intelligent diagnosis POE timing restart Single port output maximum power 90W(1-8 port) Power priority setting

Product Information	Detailed information
SMX3730BP	8*10/100/1000/2500 Base-T ports(POE/POE+/POE++),16*10/100/1000/2500  Base-T ports(POE/POE+),6* 1G/10 GE Base-X SFP+ ports,IEEE 802.3af/at/bt,Total Output Power: 440W;
SMX3730HP	8*10/100/1000/2500 Base-T ports(POE/POE+/POE++),16*10/100/1000/2500  Base-T ports(POE/POE+),6* 1G/10 GE Base-X SFP+ ports,IEEE 802.3af/at/bt,Total Output Power: 830W;