| Product Information | |
| Product Model | SFG2526P |
| Hardware specifications | |
| Fixed Ports | 20*10/100 Base-T ports(POE/POE+) 4*10/100/1000 Base-T ports(POE/POE+) 2* 1000 Base-X SFP ports |
| Consloe | 1 |
| Reset | 1 |
| Max Output Power(single port) | 30W |
| Total Power Consumption | 440W |
| PoE Pin-out | 1/2(+),3/6(-) |
| Switching capacity | 16Gbps |
| Forwarding Rate | 11.9Mpps |
| Flash/RAM | 16MB/128MB |
| Temperature | Operating temperature: (-10 - 50)°C Storage temperature: (-40 - 70)°C |
| Humidity | Operating humidity: (10% - 90%) RH, non-condensing Storage humidity: (5% - 90%) % RH, non-condensing |
| Dimensions(L*W*H) | 440(L)*285(W)*44.5(H)mm |
| Power | AC:100~240VAC,50~60Hz |
| Power consumption | 440W output the whole device |
| Weight | <6Kg |
| Lightning protection | 6KV |
| MAC address table | 8K |
| LED Indicator | Power,System ,Link/Act,POE |
| Software specifications | |
| Forwarding mode | Store-and-forward |
| Protocol and Standards | IEEE 802.3, 10 Base-T Ethernet; |
| IEEE 802.3u,100 BASE-TX; | |
| IEEE 802.3ab,1000 BASE-T; | |
| IEEE 802.3z,1000 BASE-X; | |
| IEEE 802.3az,EEE(Energy Efficient Ethernet); | |
| IEEE 802.3af | |
| IEEE 802.3at | |
| MAC Address Table | Up to 8K MAC addresses |
| Support auto-update, two-way learning | |
| Buffer Memory | 4.1Mbit |
| Jumbo Frame | 9K Bytes |
| VLAN | Port-based VLANs |
| 4K-entry Vlan Table | |
| VLANs based on IEEE 802.1q | |
| Spanning Tree | Support Spanning Tree Protocol |
| Support Rapid Spanning Tree Protocol | |
| Link Aggregation | Support 8 aggregation groups, and a maximum of 8 ports in each aggregation group |
| Static aggregation and LACP | |
| Port Mirroring | Support bi-direction port mirroring |
| RSPAN function for remote mirroring | |
| Port Isolation | Isolation between downlink ports without influence the communication between downlink and uplink ports |
| Port Flow Control | Back-pressure traffic control under Half-Duplex mode |
| IEEE 802.3x traffic control under Full-Duplex mode | |
| Port Rate Restriction | Port-based ingress or egress rate limiting |
| DHCP | DHCP Snooping |
| IPv6 | ICMP v6, Telnet v6 |
| Storm Suppression | Support the suppression of broadcast storm based on forwarding rate |
| Multicast Control | Support IGMPv1/2/3 and MLDv1/2 Snooping; |
| Security | Attack Prevention(Land attack\Blat attck\Ping attack\TCP control flag attrck) |
| MAC & Port based Security | |
| QOS | 802.1p(Port Queuing Priority) |
| WRR (Weighted Round Robin) | |
| Cos/Tos,QOS | |
| PoE | PoE ouput priority Management |
| Intelligent restart | |
| Timed restart | |
| Physic Medium | 10/100Base-TX:UTP category 3/4/5 cables( Maximum 100m) |
| 1000Base-T:UTP Category 5 cable( Maximum 100m) | |
| 1000Base-SX:fiber with 850nm wavelength,supports a max transmission distance of 550m | |
| 1000Base-LX:fiber with 1310nm / 1550nm wavelength,supports a max transmission distance of 80km | |
| Network Cable Deployment | Support Auto-MDIX function, automatically identify straight forward cable and cross-over cable |
| Negotiation Pattern | Support port auto-negotiation function( automatically negotiate transmission rate and Duplex modes) |
| Maintenance | Detect the connectivity of network cables |
| Uploading or downloading of the configuration data | |
| Uploading of upgrade patch | |
| Support system logs | |
| WEB-based reset to factory defaults | |
| Management | WEB-based management |
| CLI Management (Command Line Interface) | |
| Telnet | |
| SNMP | |
| Product Information | Detailed information |
| SFG2526P | 20*10/100 Base-TX ports(POE/POE+), 4*10/100/1000 Base-T ports(POE/POE+) , 2* 1000 Base-X ports, IEEE 802.3af/at,Total Output Power: 440W. |
| Transceivers | |
| SFP-GE-SX-MM850 | 1000BASE-SX SFP Transceiver, Multi-Mode (850nm, 550m, LC) |
| SFP-GE-LX-SM1310 | 1000BASE-LX SFP Transceiver, Single Mode (1310nm, 20km, LC) |
| SFP-GE-SC-1310 | SFP Gigabit optical module, TX1310/RX1550 (20km, SC) |
| SFP-GE-SC-1550 | SFP Gigabit optical module, TX1550/RX1310 (20km, SC) |